Posi Close Wheel Applications

Online ordering is not available for shippment outside of the United States.
Please call to place international orders
 

MaxEmerge Plus, XP, Pro

Includes most 1700 series planters made from late 1990's to current. The wheels are attached to the planter with a 5/8" or 16mm bolt with spacers/washers to adjust spacing.

Note: Some early 1700 MaxEmerge 2 series planters require different wheels. MaxEmerge (7000-7100) and MaxEmerge 2 (7200-7300-early 1700) that have upgraded tailpieces will usually use this wheel style. Please call us if you have any questions and we will be happy to find the correct wheel for your specific planter.

Mounting hardware is not included as the existing OEM hardware and spacers may be reused. If you require new hardware please order it through John Deere.

 

Part Number: PW-193NT

Price: $175.00 / row

 
 

MaxEmerge 2

Includes model 7200, 7300 & early 1700 series planters. The wheels are mounted over a shaft on the tailpiece and are held on with left and right hand nuts. The original dust cap may be used with these wheels.

Note: Some planters have been updated to newer cast iron tailpieces and require PW-193NT (see above). Please call us if you have any questions and we will be happy to find the correct wheel for your specific planter.

Mounting hardware is not included as the existing OEM hardware may be reused. Wheels do include hardware shown below to bolt the center hub to outer ring. If you require new hardware please order it through John Deere.

 

Part Number: PW-066NT

Price: $175.00 / row

 

 

 

 

 

 
 

MaxEmerge

Includes model 7000 & 7100 series planters. The wheels are attached via the bearing spindle sliding into a tube on the tailpiece and are fastened with 1/4" roll pins.

Note: Some planters have been updated to newer tailpieces and require PW-193NT (see above). If your tailpieces are worn out we highly recommend you update to newer aftermarket tailpieces. Please call us if you have any questions and we will be happy to find the correct wheel for your specific planter.

Mounting hardware is not included as the existing OEM hardware may be reused. Wheels do include hardware shown below to bolt the center hub to outer ring. If you require new hardware please order it through John Deere.

 

Part Number: PW-065NT

Price: $175.00 / row

 
   

1993-CURRENT

Wheels are fastened on with a 5/8" or 16mm bolt with spacers/washers to adjust spacing.

Mounting hardware is not included as the existing OEM hardware and spacers may be reused. If you require new hardware please order it through Kinze.

 

Part Number: PW-193NT

Price: $175.00 / row

 
 

Optional Kinze Alignment Kit (1993-Current)

Some Kinze planters will not allow our wheels to mesh due to tailpiece design. Therefore, we have a Meshing Kit to correct wheel alignment for these planters. The kit is only required if you want to mesh our wheels together completely. The kit comes with all the required hardware and two corrective alignment plates as shown.

PW-325

Part Number: PW-326

Price: $20.00 / row

 

 
   
 

1992 & EARLIER

Wheels are mounted by the bearing spindle which slides into the tube on the tailpiece and are fastened with 1/4" roll pins.

Mounting hardware is not included as the existing OEM hardware may be reused. Wheels do include hardware shown below to bolt the center hub to outer ring. If you require new hardware please order it through Kinze.

Part Number: PW-065 NT

Price: $175.00 / row

 
 
   
 

6000 & 8000 SERIES

Wheels are mounted with a 5/8" or 16mm bolt with spacers/washers to adjust spacing.

Note: White Planters with a SINGLE WIDE closing wheel system will not work with Posi Close Wheels. We recommend converting the planter to the "V" style dual wheel system. We do not carry a conversion kit for White, however, one can be obtained through White. Once single wheel systems are converted PW-193NT wheels will fit onto the planter.

Mounting hardware is not included as the existing OEM hardware and spacers may be reused. If you require new hardware please order it through White.

 

Part Number: PW-193NT

List Price: 175.00 / row

 
 

800-900 & 1200 SERIES

These planters have a single wide closing wheel system. They must be converted to the "V" style dual wheel system to accommodate our Posi Close Wheels. Conversion can be done via our PW-293 kit. The kit requires removal of existing arms and wheel. It can, however, be used with or without the original planter closing disks.

Wheels and Conversion kit sold separately.

Order one conversion kit and one pair of wheels per row. The mounting hardware for the wheels is included in the conversion kit.

Part Number: PW-293 Conversion Kit

Price: $90.00 / row

 

Part Number: PW-193NT Wheels

Price: $175.00 / row

 
 

Optional Liquid Fertilizer Tube for Case Planter

Liquid Fertilizer tube mounts to Schlagel Mfg. conversion kit. These tubes allow application of liquid fertilizer on top of seed bed while planting.

Part Number: PW-347 Liquid Fertilizer Tube

Price: $40.00 / row

 
 

NG+2 / Upgraded NG+ (Requires Monosem Tailpiece Upgrade Kit for NG+ planters)

Wheels are mounted with a 5/8" or 16mm bolt with spacers/washers to adjust spacing.

Mounting hardware is not included as the existing OEM hardware and spacers may be reused. If you require new hardware please order it through us or you local Monosem dealer.

Part Number: PW-193NT

Price: $175.00 / row

 

 
 

Monosem NG+ Tailpiece Upgrade Kit

An upgrade kit is required to use Posi Close wheels on Monosem Ng+ planters with drilled rod adjustable tailpieces. Once the tailpiece is upgraded order PW-193NT Closing Wheels above.

The Tailpiece Upgrade Kit includes:

1x 7080.S Bracket
2x 900159 Bushing spacer, standard 7/16" wide
1x 30513015 Bolt, 16 x 80, RH
1x 30513115 Bolt, 16 x 80, LH

We also recommend replacing Monosem Part # 7093 "Pivot Pin" if it shows wear when the tailpiece kit is being installed. The pin can be ordered separately below:

MUK

 

Part Number: Monosem - Tail

 

Part Number: 7093 - Pivot Pin

Price: $85.00

Price: $11.00