- Product Information
Rapid Till
Lightweight and low draft, the Rapid Till, is able to travel up to 10 m.p.h., allowing you to cover more acres in less time. The machine is perfect for applying fertilizer, and can be attached to your planter to allow for a one pass planting system. Excels at handling high-residue with minimal disturbance / plugging.
Common Wear Parts
Coulters & bearings are standard parts that can be found your local dealership
Pin Adjustable
Adjust and set up your machine to fit your soil conditions & preferences
Adjustable Shank Depths
Running depths range from 2” to 11”
Horsepower Needed
Each row unit weighs 350 lbs, and on average requires 20 HP per row to pull
Options
- 4 to 24 row machine with 20”- 40″ row spacing to accommodate your equipment
- Planter lift assist and link arms to connect a planter to complete a one-pass tilling and planting operation.
- The Strip Freshener Kit, allows for strip tilling in the fall & freshening in the spring
- Folding Bar
Specs
- 20″ flat coulter
- Adjustable row cleaners
- 3/4″ x 4″ shank
- Two 17″ wavy coulters
- 16″ dual-wheel light packer
Resources
Rapid Till HD
For more rugged regions the Rapid Till HD, our heavy duty strip till system, allows you to till deeper and is built for more residue and rocky conditions. A standard shear bolt or a hydraulic reset is available to handle rough soil conditions.
Common wear parts
Coulters & bearings are standard parts that can be found your local dealership
Pin Adjustable
Adjust and set up your machine to fit your soil conditions & preferences
Adjustable shank depths
Running depths range from 6” to 16”
Horsepower Needed
An average of 25 HP per row is recommended, but actual horsepower requirements will vary with options and soil conditions.
Options
- 4 to 16 row machine with 20”- 40″ row spacing to accommodate your equipment
- Planter Caddy – Our planter caddies will carry your Rapid-Till HD and planter all in one machine, creating a true “one-pass” tilling and planting operation.
- Folding Bar
- Folding Bar with Planter Caddy Mounts
- Planter Link Arms
Specs
- 24″ flat coulter
- Built-in row cleaners
- 3/4″ semi-parabolic shank with 6” point
- Two 20″ wavy coulters
- 16″ dual-wheel packer
Resources
Related Products
No-Till Gauge WheelsNo-Till Gauge Wheels Not only do our No-Till Gauge Wheels greatly reduce sidewall compaction, they also act as a rotary scraper (scraping outward from the center of the disk)—which allows seed openers and coulters to continue to turn in harsh conditions. When using our Wheels in conjunction with any stock scraper, you’ll notice a massive […]
Planter CaddyPlanter Caddy Our planter caddy will carry your Rapid-Till HD and planter all in one machine, creating a true “one-pass” tilling and planting operation.
Strip Freshener KitStrip Freshener Kit Convert your Rapid Till machine to a Strip Freshener in minutes! Why get a whole new machine when the one you already have can do the work of two? Our kit converts your Rapid Till to a Strip Freshener in less than 5 minutes per row. Just swap out the knives on […]